ASME B16.47 Flange


ASME B16.47 Flange ASME B16.47 is a standard that covers large diameter steel flanges (NPS 26 through NPS 60). The standard is titled "Large Diameter Steel Flanges NPS 26 through NPS 60 Metric/Inch Standard" and is divided into two parts:

ASME B16.47 Series A:This part of the standard covers large diameter flanges with rating class designations of Class 150, 300, 400, 600, 900, and 1500. Series A flanges are typically heavier than Series B flanges. The dimensions, tolerances, and materials for these flanges are specified in ASME B16.47 Series A.

ASME B16.47 Series B: This part of the standard covers large diameter flanges with rating class designations of Class 75, 150, 300, 400, 600, 900, and 1500. Series B flanges are typically lighter than Series A flanges. The dimensions, tolerances, and materials for these flanges are specified in ASME B16.47 Series B.

asme-b16-47-flange
ASME B16.47 Flange

ASME B16.47 Flange Specifications

Specification ASME B16.47 Flange
Flange Test Hydrostatic testing machine/ UI trasonic flaw detector/ X-ray detector/ Direct-reading Spectrograph/ Magnetic particle detector
Flange Equipment Pushing Machine/ electric bevelling machine/ Press machine/ Bending machine/ Sand-blasting machine etc
Coating Anti-rust Paint/ Zinc Plated/ Oil Black Paint/ Yellow Transparent/ Cold and Hot Dip Galvanized
Application Bitumen upgraders
Heavy oil refineries.
Nuclear power (mostly seamless).
Petrochemicals and acids.
Forging Methods Casting/ Forging/ Rolling/ Cutting
EN Standard 6Bar/ 10Bar/ 16Bar/ 25Bar/ 40Bar
DIN Standard PN6/ PN10/ PN16/ PN25/ PN40/ PN64
JIS Standard 5K/ 10K/ 16K 20K/ 30K/ 40K/ 63K
UNI Standard 6 Bar/ 10 Bar/ 16 Bar/ 25 Bar/ 40 Bar
Schedule SCH 5S, SCH 10, SCH 40, SCH 80, SCH 120, SCH 160, SCH 180 To XXS
Manufacturer Length NPS 1⁄₂" To NPS 48”
Face Type RTJ/ FF/ RF/ lap joint/ Male & Female / Tongue & Groove.
Supporting Material Gasket/ Ring Joint/ Flange Bolts
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production Technique Forged/ Heat treated and machined
Manufacturer of Forged/ Threaded/ Screwed / Plate
Manufacturer Pressure Class Class 150 (lb) up to 24"
Class 300 (lb) up to 20"
Class 600 (lb) up to 20"
Class 900 (lb) up to 16"
Class 1500 (lb) up to 10"
Class 2500 (lb) up to 8"

Types Of ASME B16.47 Flange

Type Of Flange Size In Inch SCH Class Grade Price In INR (India) Per Piece
Stainless Steel Blind Flange 3/4 40 150 ASTM A182 F304 150.00
1 40 150 - 233.00
Blind 1-1/2 40 150 - 394.00
Stainless Steel Weld Neck Flange 2 STD 150 - 390.00
- 4 STD 300 - 850.00
Weld Neck 6 80 300 - 1287.00
Stainless Steel Slip On Flange 2 40 150 - 387.00
- 3 40 150 - 547.00
Slip On 8 80 300 ASTM A182 F304 1600.00

Types Of ASME B16.47 Flange

asme-b16-47-series-a-plate-flange
ASME B16.47 Series A Plate Flange
asme-b16-47-slip-on-flange
ASME B16.47 Slip On Flange
asme-b16-47-weld-neck-flange
ASME B16.47 Weld Neck Flange
asme-b16-47-series-a-socket-weld-flange
ASME B16.47 Series A Socket Weld Flange
asme-b16-47-blind-flange
ASME B16.47 Blind Flange
ansi-b16-47-rtj-flanges
ANSI B16.47 RTJ Flanges
ansi-b16-47-flange
ANSI B16.47 Flange
asme-b16-47-pipe-flange
ASME B16.47 Pipe Flange
asme-b16-47-series-a-flanges
ASME B16.47 Series A Flanges
asme-b16-47-series-b-flanges
ASME B16.47 Series B Flange
asme-b16-47-series-a-slip-on-flange
ASME B16.47 Series A Slip On Flange
asme-b16-47-square-flanges
ASME B16.47 Square Flange

ASME B16.47 Flange Dimensions

ANSI B16.47 Series A Class 150 Flanges Dimensions

ansi-b16-47-series-a-flanges-dimensions
NPS Outer Diameter(O.D.) Minimum Thickness – Weld Neck
(tf)
Minimum Thickness – BLRF
(tf)
Length Of Through Hub
(Y)
Hub Diameter Base
(X)
Hub Diameter Top
(A
Raised Face Diameter
(R)
Drilling And Bolt Circle Diameter Drilling And Number of Bolt Holes Drilling And Diameter of Bolts Hole Diameter of Bolts Minimum Fillet Radius(r1)
26 34.25 2.63 2.63 4.69 26.62 26 29.5 31.75 24 13⁄8 11⁄4 0.38
28 36.5 2.75 2.75 4.88 28.62 28 31.5 34 28 13⁄8 11⁄4 0.44
30 38.75 2.88 2.88 5.32 30.75 30 33.75 36 28 13⁄8 11⁄4 0.44
32 41.75 3.13 3.13 5.63 32.75 32 36 38.5 28 15⁄8 11⁄2 0.44
34 43.75 3.19 3.19 5.82 34.75 34 38 40.5 32 15⁄8 11⁄2 0.5
36 46 3.5 3.5 6.13 36.75 36 40.25 42.75 32 15⁄8 11⁄2 0.5
38 48.75 3.38 3.38 6.13 39 38 42.25 45.25 32 15⁄8 11⁄2 0.5
40 50.75 3.5 3.5 6.38 41 40 44.25 47.25 36 15⁄8 11⁄2 0.5
42 53 3.75 3.75 6.69 43 42 47 49.5 36 15⁄8 11⁄2 0.5
44 55.25 3.94 3.94 6.94 45 44 49 51.75 40 15⁄8 11⁄2 0.5
46 57.25 4 4 7.25 47.12 46 51 53.75 40 15⁄8 11⁄2 0.5
48 59.5 4.19 4.19 7.5 49.12 48 53.5 56 44 15⁄8 11⁄2 0.5
50 61.75 4.32 4.32 7.94 51.25 50 55.5 58.25 44 17⁄8 13⁄4 0.5
52 64 4.5 4.5 8.19 53.25 52 57.5 60.5 44 17⁄8 13⁄4 0.5
54 66.25 4.69 4.69 8.44 55.25 54 59.5 62.75 44 17⁄8 13⁄4 0.5
56 68.75 4.82 4.82 8.94 57.38 56 62 65 48 17⁄8 13⁄4 0.5
58 71 5 5 9.19 59.38 58 64 67.25 48 17⁄8 13⁄4 0.5
60 73 5.13 5.13 9.38 61.38 60 66 69.25 52 17⁄8 13⁄4 0.5
  • Dimensions are in inch.
  • (1) The min. flange thickness does not include the (RF) thickness
  • (2) This dimension is for the large end of hub, which may be straight or tapered.
  • (3) Weld neck Bore/ Inner Diameter is to be specified by the purchaser

ANSI B16.47 Series A Class 300 Flanges Dimensions

ansi-b16-47-series-a-flanges-dimensions
NPS Outer Diameter(O.D.) Minimum Thickness – Weld Neck
(tf)
Minimum Thickness – BLRF
(tf)
Length Of Through Hub
(Y)
Hub Diameter Base
(X)
Hub Diameter Top
(A)
Raised Face Diameter
(R)
Drilling And Bolt Circle Diameter Drilling And Number of Bolt Holes Drilling And Diameter of Bolts Hole Diameter of Bolts Minimum Fillet Radius((r1)
26 38.25 3.07 3.25 7.19 28.38 26 29.5 34.5 28 13/4 15/8 0.38
28 40.75 3.32 3.5 7.69 30.5 28 31.5 37 28 13/4 15/8 0.44
30 43 3.57 3.69 8.19 32.56 30 33.75 39.25 28 17/8 13/4 0.44
32 45.25 3.82 3.88 8.69 34.69 32 36 41.5 28 2 17/8 0.44
34 47.5 3.94 4.07 9.07 36.88 34 38 43.5 28 2 17/8 0.5
36 50 4.07 4.32 9.44 39 36 40.25 46 32 21/8 2 0.5
38 46 4.19 4.19 7.06 39.12 38 40.5 43 32 15/8 11/2 0.5
40 48.75 4.44 4.44 7.56 41.25 40 42.75 45.5 32 13/4 15/8 0.5
42 50.75 4.63 4.63 7.82 43.25 42 44.75 47.5 32 13/4 15/8 0.5
44 53.25 4.82 4.82 8.06 45.25 44 47 49.75 32 17/8 13/4 0.5
46 55.75 5 5 8.44 47.38 46 49 52 28 2 17/8 0.5
48 57.75 5.19 5.19 8.75 49.38 48 51.25 54 32 2 17/8 0.5
50 60.25 5.44 5.44 9.07 51.38 50 53.5 56.25 32 21/8 2 0.5
52 62.25 5.63 5.63 9.32 53.38 52 55.5 58.25 32 21/8 2 0.5
54 65.25 5.94 5.94 9.88 55.5 54 57.75 61 28 23/8 21/4 0.5
56 67.25 6 6 10.19 57.62 56 59.75 63 28 23/8 21/4 0.5
58 69.25 6.19 6.19 10.44 59.62 58 62 65 32 23/8 21/4 0.5
60 71.25 6.38 6.38 10.69 61.62 60 64 67 32 23/8 21/4 0.5

ASME B16 47 Slip On Flange Dimensions

stainless-steel-slip-on-flange-dimensions
Normal Size Of Steel Pipe Inner Diameter Outer Daimeter SORF Circle Bolt (B.C.) Raised Raised Face Of SORF SORF Hight (H) Wall Thickness Of (RF) Raised Face (T1) Thickness2
(Flat Face)
SORF Bolts Holes
Number Of SORF Flanges Bolt Hole
1/2 0.88 3.50 2.38 1.38 .063 1.19 .62 .38 .56 .62 4
3/4 1.09 3.88 2.75 1.69 .063 1.50 .62 .44 .56 .62 4
1 1.36 4.25 3.12 2.00 .063 1.94 .69 .50 .63 .62 4
1-1/4 1.70 4.62 3.50 2.50 .063 2.31 .81 .56 .75 .62 4
1-1/2 1.97 5.00 3.88 2.88 .063 2.56 .88 .62 .82 .62 4
2 2.44 6.00 4.75 3.62 .063 3.06 1.00 .69 .94 .75 4
2-1/2 2.94 7.00 5.50 4.12 .063 3.56 1.12 .82 1.06 .75 4
3 3.57 7.50 6.00 5.00 .063 4.25 1.19 .88 1.13 .75 4
3-1/2 4.07 8.50 7.00 5.50 .063 4.81 1.25 .88 1.19 .75 8
4 4.57 9.00 7.50 6.19 .063 5.31 1.31 .88 1.25 .75 8
5 5.66 10.00 8.50 7.31 .063 6.44 1.44 .88 1.38 .88 8
6 6.72 11.00 9.50 8.50 .063 7.56 1.56 .94 1.50 .88 8
8 8.72 13.50 11.75 10.62 .063 9.69 1.75 1.06 1.69 .88 8
10 10.88 16.00 14.25 12.75 .063 12.00 1.94 1.13 1.88 1.00 12
12 12.88 19.00 17.00 15.00 .063 14.38 2.19 1.19 2.13 1.00 12
14 14.14 21.00 18.75 16.25 .063 15.75 2.25 1.32 2.19 1.12 12
16 16.16 23.50 21.25 18.50 .063 18.00 2.50 1.38 2.44 1.12 16
18 18.18 25.00 22.75 21.00 .063 19.88 2.69 1.50 2.63 1.25 16
20 20.20 27.50 25.00 23.00 .063 22.00 2.88 1.63 2.83 1.25 20
22 22.22 29.50 27.25 25.25 .063 24.25 3.13 1.75 3.07 1.38 20
24 24.25 32.00 29.50 27.25 .063 26.12 3.25 1.82 3.19 1.38 20

ASME B16 47 Series B Slip On Flange Dimensions

stainless-steel-slip-on-flange-dimensions
Normal Size Of Steel Pipe Inner Diameter Outer Daimeter SORF Circle Bolt (B.C.) Raised Raised Face Of SORF SORF Hight (H) Wall Thickness Of (RF) Raised Face (T1) Thickness2
(Flat Face)
SORF Bolts Holes
Number Of SORF Flanges Bolt Hole
1/2 0.88 3.75 2.62 1.38 .063 1.50 0.88 0.50 0.82 0.62 4
3/4 1.09 4.62 3.25 1.69 .063 1.88 1.00 .056 0.94 0.75 4
1 1.36 4.88 3.50 2.00 .063 2.12 1.06 0.63 1.00 0.75 4
1-1/4 1.70 5.25 3.88 2.50 .063 2.50 1.06 0.69 1.00 0.75 4
1-1/2 1.95 6.12 4.50 2.88 .063 2.75 1.19 0.75 1.13 0.88 4
2 2.44 6.50 5.00 3.62 .063 3.31 1.31 0.82 1.25 0.75 8
2-1/2 2.94 7.50 5.88 4.12 .063 3.94 1.50 0.94 1.44 0.88 8
3 3.57 8.25 6.62 5.00 .063 4.62 1.69 1.06 1.63 0.88 8
3-1/2 4.07 9.00 7.25 5.50 .063 5.25 1.75 1.13 1.69 0.88 8
4 4.57 10.00 7.88 6.19 .063 5.75 1.88 1.19 1.82 0.88 8
5 5.66 11.00 9.25 7.31 .063 7.00 2.00 1.32 1.94 0.88 8
6 6.72 12.50 10.62 8.50 .063 8.12 2.06 1.38 2.00 0.88 12
8 8.72 15.00 13.00 10.62 .063 10.25 2.44 1.56 2.38 1.00 12
10 10.88 17.50 15.25 12.75 .063 12.62 2.62 1.82 2.56 1.12 16
12 12.88 20.50 17.75 15.00 .063 14.75 2.88 1.94 2.82 1.25 16
14 14.14 23.00 20.25 16.25 .063 16.75 3.00 2.06 2.94 1.25 20
16 16.16 25.50 22.50 18.50 .063 19.00 3.25 2.19 3.19 1.38 20
18 18.18 28.00 24.75 21.00 .063 21.00 3.50 2.32 3.44 1.38 24
20 20.20 30.50 27.00 23.00 .063 23.12 3.75 2.44 3.69 1.38 24
22 22.22 33.00 29.25 25.25 .063 25.25 4.00 2.57 3.94 1.63 24
24 24.25 36.00 32.00 27.25 .063 27.62 4.19 2.69 4.13 1.62 24

ASME B16 47 Blind Flange Dimensions

stainless-steel-blind-flange-dimensions
(Normal Size Of Steel Pipe) In Inch Outer Daimeter Of
(A)
WT Of (B)
RF Daimeter Of
(C)
(D)
(B.C.D.)
# BLRF Flanges Bolts
Holes
Daimeter Of BLRF Bolt Holes
Weight In Kilogram (KG)
1/2 3-1/2 7/16 1-3/8 2-3/8 4 5/8 2
3/4 3-7/8 1/2 1-11/16 2-3/4 4 5/8 2
1 4-1/4 9/16 2 3-1/8 4 5/8 2
1-1/4 4-5/8 5/8 2-1/2 3-1/2 4 5/8 3
1-1/2 5 11/16 2-7/8 3-7/8 4 5/8 3
2 6 3/4 3-5/8 4-3/4 4 3/4 4
2-1/2 7 7/8 4-1/8 5-1/2 4 3/4 7
3 7-1/2 15/16 5 6 4 3/4 9
3-1/2 8-1/2 15/16 5-1/2 7 8 3/4 13
4 9 15/16 6-3/16 7-1/2 8 3/4 17
5 10 15/16 7-5/16 8-1/2 8 7/8 20
6 11 1 8-1/2 9-1/2 8 7/8 27
8 13-1/2 1-1/8 10-5/8 11-3/4 8 7/8 47
10 16 1-3/16 12-3/4 14-1/4 12 1 67
12 19 1-1/4 15 17 12 1 123
14 21 1-3/8 16-1/4 18-3/4 12 1-1/8 139
16 23-1/2 1-7/16 18-1/2 21-1/4 16 1-1/8 187
18 25 1-9/16 21 22-3/4 16 1-1/4 217
20 27-1/2 1-11/16 23 25 20 1-1/4 283
24 32 1-7/8 27-1/4 29-1/2 20 1-3/8 415

ANSI B16.47 Series B Class 150 Flange Dimensions

ansi-b16-47-series-b-flange-dimensions
Normal Pipe Size Outside
Diameter (O.D.)
(Min.) Wall Thickness Outer Daimeter of
Raised
Face (RF)
Hub Diameter Length Of
Thru Hub
Weight (lbs) Drilling
WNRF Flange BLRF WNRF Flange WNRF Flange BLRF Flange Number Holes Diameter
Holes
Bolt Circle
Diameter
26 30 1.25 1.25 27.75 26.63 2.25 80 255 36 0.75 28.50
28 32 1.25 1.25 29.75 28.63 2.38 85 290 40 0.75 30.50
30 34 1.25 1.25 31.75 30.63 2.50 90 330 44 0.75 32.50
32 36 1.32 1.38 33.75 32.63 2.69 105 390 48 0.75 34.50
34 38 1.32 1.44 35.75 34.63 2.82 110 430 52 0.75 36.50
36 40.69 1.38 1.61 38 36.81 3.32 145 58 40 0.75 39.06
38 42.69 1.44 1.69 40 38.81 3.44 160 595 40 0.88 41.06
40 44.69 1.44 1.69 42 40.81 3.57 170 760 44 0.88 43.06
42 16.69 1.50 1.82 44 42.81 3.69 185 895 48 0.88 45.06
44 49.25 1.63 1.88 46.25 44.88 4.07 230 1065 36 1 47.38
46 51.25 1.69 1.94 48.25 46.88 4.19 245 1185 40 1 49.38
48 53.25 1.75 2.07 50.25 48.88 4.32 270 1315 44 1 51.38
50 55.25 1.82 2.13 52.25 50.94 4.50 290 1505 44 1 53.38
52 57.38 1.82 2.19 54.25 52.94 4.69 310 1665 48 1 55.50
54 59.38 1.88 2.31 56.25 55 4.88 340 1840 48 1 57.50
56 62 1.94 2.38 58.50 57.13 5.25 400 2110 40 1.12 59.88
58 64 2 2.44 60.50 59.13 5.38 430 2300 44 1.12 61.88
60 66 2.13 2.56 62.50 61.13 5.63 475 2500 44 1.12 63.88

ANSI B16.47 Series B Class 75 Flange Dimensions

ansi-b16-47-series-b-flange-dimensions
Normal Pipe Size Outside
Diameter (O.D.)
(Min.) Wall Thickness Outer Daimeter of
Raised
Face (RF)
Hub Diameter Length Of
Thru Hub
Weight (lbs) Drilling
WNRF Flange BLRF WNRF Flange WNRF Flange BLRF Flange Number Holes Diameter
Holes
Bolt Circle
Diameter
26 30 1.25 1.25 27.75 26.63 2.25 80 255 36 0.75 28.50
28 32 1.25 1.25 29.75 28.63 2.38 85 290 40 0.75 30.50
30 34 1.25 1.25 31.75 30.63 2.50 90 330 44 0.75 32.50
32 36 1.32 1.38 33.75 32.63 2.69 105 390 48 0.75 34.50
34 38 1.32 1.44 35.75 34.63 2.82 110 430 52 0.75 36.50
36 40.69 1.38 1.61 38 36.81 3.32 145 58 40 0.75 39.06
38 42.69 1.44 1.69 40 38.81 3.44 160 595 40 0.88 41.06
40 44.69 1.44 1.69 42 40.81 3.57 170 760 44 0.88 43.06
42 16.69 1.50 1.82 44 42.81 3.69 185 895 48 0.88 45.06
44 49.25 1.63 1.88 46.25 44.88 4.07 230 1065 36 1 47.38
46 51.25 1.69 1.94 48.25 46.88 4.19 245 1185 40 1 49.38
48 53.25 1.75 2.07 50.25 48.88 4.32 270 1315 44 1 51.38
50 55.25 1.82 2.13 52.25 50.94 4.50 290 1505 44 1 53.38
52 57.38 1.82 2.19 54.25 52.94 4.69 310 1665 48 1 55.50
54 59.38 1.88 2.31 56.25 55 4.88 340 1840 48 1 57.50
56 62 1.94 2.38 58.50 57.13 5.25 400 2110 40 1.12 59.88
58 64 2 2.44 60.50 59.13 5.38 430 2300 44 1.12 61.88
60 66 2.13 2.56 62.50 61.13 5.63 475 2500 44 1.12 63.88

ASME B16 47 Series B Flange Dimensions Class 300

ansi-b16-47-series-b-flange-dimensions
Normal Pipe Size Outside
Diameter (O.D.)
(Min.) Wall Thickness O.D.
of
Raised
Fa (RF)ce
Hub Diameter Length Of
Thru Hub
Weight (lbs) Drilling
WNRF Flange BLRF WNRF Flange WNRF Flange BLRF Flange Number Holes Diameter
Holes
Bolt
Circle Diam.
26 34.12 3.44 3.44 29 26.19 5.63 400 905 32 1.38 31.62
28 36.25 3.44 3.44 31 28.19 5.81 450 1023 36 1.38 33.75
30 39 3.63 3.63 33.25 30.25 6.16 550 1250 36 1.50 36.25
32 41.50 4 4 35.50 32.25 6.56 685 1556 32 1.62 38.50
34 43.62 4 4 37.50 34.25 6.75 750 1719 36 1.62 40.62
36 46.12 4 4 39.75 36.25 7.06 840 1920 32 1.75 42.88
38 48.12 4.31 4.31 41.75 38.25 7.50 915 2257 36 1.75 44.88
40 50.12 4.50 4.50 43.88 40.25 7.75 990 2550 40 1.75 46.88
42 52.50 4.63 4.63 46 42.31 8 1135 2875 36 1.88 49
44 54.50 4.94 4.94 48 44.31 8.38 1235 3305 40 1.88 51
46 57.50 5 5.06 50 46.31 8.69 1470 3766 36 2 53.75
48 59.50 5 5.25 52.25 48.31 8.75 1575 4183 40 2 55.75
50 61.50 5.38 5.44 54.25 50.31 9.19 1710 4629 44 2 57.75
52 63.50 5.56 5.61 56.25 52.31 9.50 1840 5096 48 2 59.75
54 65.88 5.32 5.81 58.25 54.31 9.38 1980 5679 48 2 62.12
56 69.50 6 6.12 60.50 56.31 10.50 2295 6642 36 2.38 65
58 71.94 6 6.31 62.75 58.31 10.75 2770 7347 40 2.38 67.44
60 73.94 5.88 6.50 65 60.31 10.63 2870 7980 40 2.38 69.44

ANSI B16.47 Series B Class 600 Flange Dimensions

ansi-b16-47-series-b-flange-dimensions
Normal Pipe Size Outside
Diameter (O.D.)
(Min.) Wall Thickness Outer Daimeter of
Raised
Face (RF)
Hub Diameter Length Of
Thru Hub
Weight (lbs) Drilling
WNRF Flange BLRF WNRF Flange WNRF Flange BLRF Flange Number Holes Diameter
Holes
Bolt Circle
Diameter
26 35 4.38 4.38 28.62 27.50 7.12 550 1195 28 1.75 31.75
28 37.50 4.56 4.56 30.88 29.62 7.50 650 1427 28 1.88 34
30 40.25 4.94 5 33.12 31.75 8.062 810 1800 28 2 36.50
32 42.75 5.12 5.31 35.25 33.88 8.50 950 2160 28 2.12 38.75
34 45.75 5.56 5.68 37.50 36 9.19 1205 2645 24 2.38 41.50
36 47.75 5.75 5.94 39.75 38.12 9.56 1340 3013 28 2.38 43.50

ASME B16.47 Series A RTJ Flange Dimensions

ring-joint-flange-dimensions
RTJ Flange Size in Inch RTJ Flanges Size in MM Outer Diameter Wall Thickness Of Ring Type Joint Outer Daimeter Of Hub Outer Daimeter Of Weld Neck Lengths Of Welding Neck Diameter Of RF (Raised Face) Height Of RF (Raised Face) PCD Diameter Pitch Of RTJ Flanges Depth Of RTJ Flanges Ring Type Joint Flange Width
(A) (B) (C) (D) (E) (F) (G) (H) (I) (J) (K) (L) -
1/2 15 90 9.6 30 21.3 46 N/A N/A 60.3 N/A N/A N/A
3/4 20 100 11.2 38 26.7 51 N/A N/A 69.9 N/A N/A N/A
1 25 110 12.7 49 33.4 54 63.5 6.35 79.4 47.63 6.35 8.74
1 1/4 32 115 14.3 59 42.2 56 73 6.35 88.9 57.15 6.35 8.74
1 1/2 40 125 15.9 65 48.3 60 82.5 6.35 98.4 65.07 6.35 8.74
2 50 150 17.5 78 60.3 62 102 6.35 120.7 82.55 6.35 8.74
2 1/2 65 180 20.7 90 73 68 121 6.35 139.7 101.6 6.35 8.74
3 80 190 22.3 108 88.9 68 133 6.35 152.4 114.3 6.35 8.74
3 1/2 90 215 22.3 122 101.6 70 154 6.35 177.8 131.78 6.35 8.74
4 100 230 22.3 135 114.3 75 171 6.35 190.5 149.23 6.35 8.74
5 125 255 22.3 164 141.3 87 194 6.35 215.9 171.45 6.35 8.74
6 150 280 23.9 192 168.3 87 219 6.35 241.3 193.68 6.35 8.74
8 200 345 27 246 219.1 100 273 6.35 298.5 247.65 6.35 8.74
10 250 405 28.6 305 273 100 330 6.35 362 304.8 6.35 8.74
12 300 485 30.2 365 323.8 113 406 6.35 431.8 381 6.35 8.74
14 350 535 33.4 400 355.6 125 425 6.35 476.3 396.88 6.35 8.74
16 400 595 35 457 406.4 125 483 6.35 539.8 454.03 6.35 8.74
18 450 635 38.1 505 457.2 138 546 6.35 577.9 517.53 6.35 8.74
20 500 700 41.3 559 508 143 597 6.35 635 558.8 6.35 8.74
24 600 815 46.1 663 610 151 711 6.35 749.3 673.1 6.35 8.74

Weight Of ASME B16.47 Flanges

weight-of-asme-b16-47-flanges

ASME B16 47 Series A Flange Weight

ASME B16 47 Series A Flange
Normal Pipe Size Class 150 Class 300 Class 600 Class 900
Welding Neck Flange BLRF Flanges Welding Neck Flange BLRF Flanges Welding Neck Flange BLRF Flanges Welding Neck Flange BLRF Flanges
22 109 162 204 284 310 437    
26 154 321 291 477 450 777 890 1100
28 175 380 352 584 506 909 1055 1350
30 204 450 405 685 575 1074 1230 1610
32 254 560 465 793 642 1253 1480 1940
34 273 625 523 919 705 1427 1750 2310
36 321 760 580 1072 800 1665 1997 2660
38 358 830 324 900 674 1509 2000 2690
40 386 925 391 1066 725 1695 2161 2950
42 442 1080 428 1206 895 2028 2379 3280
44 491 1230 485 1378 951 2246 3321 3810
46 525 1345 559 1570 1055 2543 3224 4430
48 580 1520 597 1745 1247 2951 3500 4860
50 624 1668 674 1983 1423 3381    
52 689 1867 728 2194 1493 3682    
54 760 2088 871 2538 1637 4091    
56 845 2308 921 2728 1843 4585    
58 923 2554 968 2975 1954 4986    
60 971 2765 1032 3250 2353 5750    

ASME B16 47 Series B Flange Weight

ASME B16 47 Series B Flange
Normal Pipe Size Class 150 Class 300 Class 600 Class 900
  WNRF BLRF WNRF BLRF WNRF BLRF WNRF BLRF
26 65 165 193 404 260 534    
28 75 200 211 457 305 637    
30 82 226 258 555 378 793    
32 94 263 315 693 436 925    
34 113 320 339 765 550 1150    
36 128 374 380 858 591 1290    
38 153 434 425 1005 668 1481    
40 166 489 459 1132 718 1662    
42 182 560 514 1280 888 1989    
44 195 626 567 1466 942 2188    
46 229 709 666 1657 1046 2458    
48 248 799 687 1772 1237 2859    
50 268 899 797 2029 1412 3280    
52 284 985 806 2230 1481 3573    
54 309 1081 840 2310 1623 3949    
56 329 1181 1117 2891 1829 4423    
58 391 1322 1194 3093 1939 4791    
60 414 1430 1215 3213 2336 5533    

Bolt Length For ASME B16.47 Flanges

Nominal Pipe Size In Inch Class 150 In Inch Class 300 In Inch Class 400 In Inch Class 600 In Inch Class 900 In Inch
(D) (L) (D) (L) (D) (L) (D) (L) (D) (L)
26 3/4 5-1/2 1-1/4 10-1/2 1-3/8 11-1/4 1-5/8 13-3/4 2-1/2 17-1/4
28 3/4 5-3/4 1-1/4 10-1/2 1-1/2 12 1-3/4 14-1/4 2-3/4 19
30 3/4 5-3/4 1-3/8 11-1/4 1-1/2 12-1/2 1-7/8 15-1/4 3 20
32 3/4 5-3/4 1-1/2 12-1/4 1-5/8 13-1/2 2 15-3/4 3 20-1/4
34 7/8 6-1/4 1-1/2 12-1/4 1-5/8 13-3/4 2-1/4 17-1/4 3-1/4 21-3/4
36 7/8 6-3/4 1-5/8 12-1/2 1-3/4 15-1/2 2-1/4 17-3/4 3 21-1/4"s
38 1 7-1/4 1-5/8 13-1/4 - - - - - -
40 1 7-1/4 1-5/8 13-1/2 - - - - - -
42 1 7-1/2 1-3/4 14 - - - - - -
44 1 7-3/4 1-3/4 14-3/4 - - - - - -
46 1-1/8 8 1-7/8 15 - - - - - -
48 1-1/8 8-1/4 1-7/8 15 - - - - - -
50 1-1/8 8-1/2 1-7/8 15-3/4 - - - - - -
52 1-1/8 8-3/4 1-7/8 16 - - - - - -
54 1-1/8 8-3/4 1-7/8 15-3/4 - - - - - -
56 1-1/8 9 2-1/4 17-3/4 - - - - - -
58 1-1/4 9-1/4 2-1/4 17-3/4 - - - - - -
60 1-1/4 9-1/2 2-1/4 17-1/2 - - - - - -

ASME B16.47 Flange Size

Normal Pipe Size DN

1/2

15

3/4

20

1

25

1 1/4

32

 1 1/2

40

2

50

2 1/2

65

3

80

4

100

ASME B16.47 Pressure Rating

asme-b16-47-pressure-rating

ASME B16.47 Tolerances

O.D. ±0.12″ ±3.2 (MM) -
The diameter of Flange Face 0.06″ (1.66 (MM)) (RF) ±0.08″ ±2.0 (MM)
0.25″ (6.44 (MM)) (RF) ±0.04″ - -
er of The diameter of the Hub at the Point of Welding ±0.21″, -0.06″ ±5.5 (MM), -1.6 (MM) -
Inner Daimeter (I.D.) ±0.12″, -0.06″ ±3.2 (MM), -1.6 (MM) -
Wall Thickness Up to 1.0″ Thickness ±0.12″, -0.00″ ±3.2 (MM), -0.00 (MM)
1.0″ to 2.0″ ±0.19″, -0.00″ ±4.8 (MM), -0.00 (MM) -
2.0″ to 3.0″ ±0.31″, -0.00″ ±7.9 (MM), -0.00 (MM) -
Over 3.0′ Thickness ±0.38″, -0.00″ ±9.6 (MM), -0.00 (MM) -
Bolts Drilling Bolt Circle Diameter ±0.06″ ±1.6 (MM)
Spacing Of Bolt Hole ±0.03″ ±0.8 (MM) -
The eccentricity of the Circle Of Bolt and Facing vs. Bore ±0.06″ ±1.6 (MM) -
Length Through Hub for Weld Neck (WN) Flanges ±0.19″ ±4.8 (MM) -

ASME B16.47 Series A Gasket Dimensions

NPS Inside Daimeter (D1) Outer Daimeter Of Gasket (D2)
Class 150 Flanges Class 300 Flanges Class 400 Flanges Class 600 Flanges
26 660 775 835 832 867
28 711 832 899 892 914
30 762 883 953 946 972
32 813 940 1006 1003 1022
34 864 991 1057 1054 1073
36 914 1048 1118 1118 1130
38 965 1111 1054 1073 1105
40 1016 1162 1114 1127 1156
42 1067 1219 1165 1178 1219
44 1118 1276 1219 1232 1270
46 1168 1327 1273 1289 1327
48 1219 1384 1324 1346 1391
50 1270 1435 1378 1403 1448
52 1321 1492 1429 1454 1499
54 1372 1549 1492 1518 1556
56 1422 1607 1543 1568 1613
58 1473 1664 1594 1619 1664
60 1524 1715 1645 1683 1721

ASME B16.47 Series B Gasket Dimensions

NPS Inside Daimeter (D1) Outer Daimeter Of Gasket (D2)
Class 150 Flanges Class 300 Flanges Class 400 Flanges Class 600 Flanges
26 660 725 772 746 765
28 711 776 826 800 819
30 762 827 886 857 879
32 813 881 940 911 933
34 864 935 994 962 997
36 914 987 1048 1022 1048
38 965 1045 1099
40 1016 1095 1149
42 1067 1146 1200
44 1118 1197 1251
46 1168 1256 1318
48 1219 1307 1368
50 1270 1357 1419
52 1321 1408 1470
54 1372 1464 1530
56 1422 1514 1594
58 1473 1580 1656
60 1524 1630 1705
WhatsApp
9820135616
Email
sales@royalsteelindia.com